Skip to content
Click here to sign up to our newsletter for news on latest offers, events and expert advice.
Click here to sign up to our newsletter for news on latest offers, events and expert advice.

PocketWizard S-RMS1AM-ACC Compatibility:

• PlusX
• Plus III
• FlexTT5
• MultiMAX with ACC port
• Use the S-RMS1AM-P or S-RMS1AM for the Plus II, older MultiMAX, or other PocketWizard radios.

Description: This is a special remote shutter release cable called a Pre-Trigger Cable. A Pre-Trigger cable controls both the half-press and full-press function of your remote camera’s shutter release. When a camera is “pre-triggered”, it is like holding your camera’s shutter release button in the half-pressed or metering/focusing position.

This –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions.

Added bonus: All S-RMS1AM-ACC cables shipped into the market starting July/August 2013 include a MSMM Adapter (stereo to mono miniphone) which converts a S-RMS1AM-ACC cable to a standard S-RMS1AM miniphone cable. This change coincides with the introduction of our new retail packaging. All cables are now packaged in a environmental friendly cardboard box with recycled white labels showing both ends of the cable as well as compatibility list. This replaces our old packaging of a zipped bag packaging.

A Standard Cable (S-RMS1AM) works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. (Using a S-RMS1AM-ACC cable with a MSMM Adapter will provide the same function as a S-RMS1AM cable.)

A Pre-Release or Pre-Trigger (-P) Cable (S-RMS1AM-P) works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely. (Using a S-RMS1AM cable with a PTMM Adapter will provide the same function as a S-RMS1AM-P cable.)

Compatible with the following radios:

PlusX: Use this cable with the PlusX to trigger the camera.

Plus III: Use this cable with the Plus III’s exclusive 2-stage trigger to wake-up or focus your remote camera just like using the camera’s shutter release button.

FlexTT5: This cable is required for relay mode with E-TTL, or other remote triggering with the FlexTT5. Learn more here. You can use a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites. The FlexTT5 does not support the 2-stage trigger function.

MultiMAX with –ACC port: Enable a remote zone with your hand-held MultiMAX, and your remote MultiMAX will wake up its remote camera with this cable. As long as the zone is turned on, the remote camera will stay awake and respond more quickly and consistently, but also consume the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes. The MultiMAX does not support the 2-stage trigger function.

Please see our PocketWizard Wiki for more details.

Compatible with Sony and Minolta Cameras:

Sony:
Sony: Minolta:
A100
A650 RD-175
A200 A57 Alpha7 Digital
A300 A580 Alpha Sweet Digital
A33
A65
Maxxum/Dynax 5D
A35
A65V
Maxxum/Dynax 7D
A350
A700
Dimage A1
A450
A77
Dimage A2
A500 A77V Dimage 5
A55 A850 Dimage 7
A55V A900 Dimage 7i
A550
A99
Film Cameras w/ cable release port

Note:  For current Sony Cameras use S-VPR1-ACC, 13369-S, or 13377-S instead

Trademarks are the property of their respective owners.

Vendor: PocketWizard

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare